Show simple item record

dc.contributor.authorFuguo Zhou
dc.contributor.authorJonathan Lagrone
dc.contributor.authorSumanta Acharya
dc.date.accessioned2017-05-09T00:24:28Z
dc.date.available2017-05-09T00:24:28Z
dc.date.copyrightDecember, 2007
dc.date.issued2007
dc.identifier.issn0022-1481
dc.identifier.otherJHTRAO-27828#1666_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/136155
dc.description.abstractHeat transfer and pressure drop measurements are reported for a rotating 4:1 aspect ratio (AR) smooth two-pass coolant passage for Reynolds number in the range of 10,000–150,000, rotation number in the range of 0–0.6, and density ratios in the range of 0.1–0.2. The measurements are performed for both 90deg and 45deg orientations of the coolant passage relative to the rotational axis. A large-scale rotating heat transfer rig is utilized, with the test section consisting of segmented foil-heated elements and thermocouples. Results for the 4:1 AR indicate that beyond specific Ro values (different values for the inlet and outlet passages), the expected trends of heat transfer enhancement on the destabilized surface and degradation on the stabilized surface are arrested or reversed. Unlike the 1:1 AR, the inlet-leading surface for the 4:1 AR shows enhancement with Ro at low Re (less than 20,000) and shows the expected degradation only at high Re. Increasing the density ratio enhances the heat transfer on all walls. Orientation of the coolant passage relative to the rotational axis has an important effect, with the 45deg orientation reducing the heat transfer on the destabilized surface and enhancing it on the stabilized surface.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleInternal Cooling in 4:1 AR Passages at High Rotation Numbers
dc.typeJournal Paper
dc.journal.volume129
dc.journal.issue12
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.2767676
dc.journal.fristpage1666
dc.journal.lastpage1675
dc.identifier.eissn1528-8943
dc.keywordsDensity
dc.keywordsRotation
dc.keywordsFlow (Dynamics)
dc.keywordsHeat transfer
dc.keywordsChannels (Hydraulic engineering)
dc.keywordsCooling
dc.keywordsReynolds number AND Coolants
dc.treeJournal of Heat Transfer:;2007:;volume( 129 ):;issue: 012
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record