Show simple item record

dc.contributor.authorM. Röger
dc.date.accessioned2017-05-09T00:24:28Z
dc.date.available2017-05-09T00:24:28Z
dc.date.copyrightDecember, 2007
dc.date.issued2007
dc.identifier.issn0022-1481
dc.identifier.otherJHTRAO-27828#1638_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/136153
dc.description.abstractMeasurement of heat transfer distribution is frequently required in engineering. However, some heat transfer techniques are not able to measure accurately on two-dimensional curved surfaces. In this field, periodic-transient measurement methods are advantageous. This paper describes the development of a periodic-transient technique for high-resolution heat transfer measurement and its application to multiple air-jet cooling of a concave solar receiver window. In contrast to other measurement techniques, the periodic-transient technique requires neither homogenous heating nor quantitative measurement of surface or fluid temperatures. The heat transfer coefficient is determined by periodically heating the substrate and evaluating the phase shift between the heat flux penetrating the substrate and the resulting temperature response. Equations for a hollow-sphere and flat-plate substrates are derived. The curved window surface is periodically heated by a simple device with standard light bulbs. A procedure for taking the transient heating characteristic into consideration is described. The distribution of surface temperature fluctuation is measured nonintrusively by thermography. For the sample application of air-jet cooling, a detailed uncertainty estimation is presented. The relative measurement uncertainty of the local, convective heat transfer coefficient ranges from −2.4% to +14.1% for h=10W∕(m2K) and from −2.3% to +9.7% for h=200W∕(m2K). The uncertainty of the spatially averaged heat transfer coefficient lies between +2.0% and +9.8% for hm=10W∕(m2K) and between +0.7% and +6.7% for hm=200W∕(m2K). The periodic-transient method described complements established techniques for high-resolution heat transfer measurements on two-dimensional curved surfaces.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleA Periodic-Transient Method for High-Resolution Heat Transfer Measurement on Two-Dimensional Curved Surfaces
dc.typeJournal Paper
dc.journal.volume129
dc.journal.issue12
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.2767677
dc.journal.fristpage1638
dc.journal.lastpage1654
dc.identifier.eissn1528-8943
dc.keywordsTemperature
dc.keywordsHeat transfer
dc.keywordsCooling
dc.keywordsFluids
dc.keywordsHeating
dc.keywordsHeat flux
dc.keywordsHeat transfer coefficients
dc.keywordsMeasurement
dc.keywordsFlat plates
dc.keywordsThermography
dc.keywordsHeat
dc.keywordsFlow (Dynamics)
dc.keywordsUncertainty
dc.keywordsNozzles AND Resolution (Optics)
dc.treeJournal of Heat Transfer:;2007:;volume( 129 ):;issue: 012
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record