Show simple item record

dc.contributor.authorFranklin H. Holcomb
dc.contributor.authorJason Whipple
dc.contributor.authorJoseph Bush
dc.contributor.authorJames L. Knight
dc.date.accessioned2017-05-09T00:24:26Z
dc.date.available2017-05-09T00:24:26Z
dc.date.copyrightMay, 2007
dc.date.issued2007
dc.identifier.issn2381-6872
dc.identifier.otherJFCSAU-28929#134_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/136127
dc.description.abstractIn military base camp operations, the standard method of power generation is via the use of diesel generators. Unfortunately, these generators are often noisy and inefficient. Base camps could benefit from a “silent camp™” operation, in which power is supplied via low-noise, low-impact methods such as fuel cells. Base camps have a variable load profile (they use more power during peak hours than at other times), and low loading levels (their generators’ rated capacity is normally much greater than the load). Consequently, the generators only operate at peak efficiency for short, intermittent intervals. Under these conditions, the generators’ fuel use is less than optimal, they require frequent maintenance, and their life cycle is shortened. Approximately 60–70% of maintenance problems for diesel generators are directly attributable to “wetstacking,” which occurs when these generators are operated at less than 50% of their rated capacity (Commerce Business Daily, Feb. 16, 2000). One solution to address these issues is to institute a hybrid power system, consisting of: a fuel cell (with inverter), an electrolyzer, and a metal hydride storage system, all coupled and packaged with a diesel generator. This system would enable the generator to operate at peak efficiency while increasing the capabilities of the power generation system. Such a system could offer numerous benefits over the base case stand alone generator as follows: (1) the ability for Silent Camp™ operation (by using the fuel cell output exclusively); (2) potential for reduced fuel consumption; (3) reduced instances of “wetstacking,” thereby decreasing generator maintenance costs; (4) the ability to have backup power from fuel cells; (5) refueling capability for hydrogen devices or vehicles; and (6) reduced environmental impact in terms of pollutant, acoustic, and thermal emissions.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleEnergy Savings for Silent Camp™ Hybrid Technologies
dc.typeJournal Paper
dc.journal.volume4
dc.journal.issue2
dc.journal.titleJournal of Fuel Cell Science and Technology
dc.identifier.doi10.1115/1.2714566
dc.journal.fristpage134
dc.journal.lastpage137
dc.identifier.eissn2381-6910
dc.keywordsFuels
dc.keywordsStress
dc.keywordsGenerators
dc.keywordsHydrogen
dc.keywordsStorage
dc.keywordsDiesel generators
dc.keywordsFuel cells
dc.keywordsEnergy generation
dc.keywordsMetals
dc.keywordsVehicles
dc.keywordsElectric power generation AND Maintenance
dc.treeJournal of Fuel Cell Science and Technology:;2007:;volume( 004 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record