Show simple item record

dc.contributor.authorR. Narayanasamy
dc.contributor.authorV. Senthilkumar
dc.contributor.authorK. S. Pandey
dc.date.accessioned2017-05-09T00:23:58Z
dc.date.available2017-05-09T00:23:58Z
dc.date.copyrightJanuary, 2007
dc.date.issued2007
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27092#113_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/135876
dc.description.abstractExperiments were carried out to evaluate the hot forging features in the high-strength sintered Powder Metallurgy TiC composite steel performs under different stress states, namely, plane and triaxial stress. Cylindrical compacts with aspect ratios 0.45, 0.75, and 1.25 were prepared, sintered and forged at the temperatures of 1120°C+10°C. The investigation suggests that the experimentally determined relative density has a straight line relationship with the new geometrical shape factor (ρ0∕ρth)(h0∕hf)(3D02∕(2Db2+Dc2)). The measured barrel radius of curvature is found to have a circular arc because the above relation is a straight line one. Relationship is established between the measured barrel radius and the stress ratio parameters namely (σθ∕σz), (σz∕σm) and (σeff∕σz) under plane stress and triaxial stress state conditions. An attempt is also made to establish a relationship between the various stress ratio parameters namely (σθ∕σz), (σz∕σm), and (σeff∕σz) under plane stress and triaxial stress state conditions and the relative density.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleSome Aspects on Hot Forging Features of P/M Sintered High-Strength Titanium Carbide Composite Steel Preforms Under Different Stress State Conditions
dc.typeJournal Paper
dc.journal.volume129
dc.journal.issue1
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2400261
dc.journal.fristpage113
dc.journal.lastpage129
dc.identifier.eissn1528-8889
dc.keywordsDensity
dc.keywordsStress
dc.keywordsSteel
dc.keywordsForging
dc.keywordsPreforms
dc.keywordsComposite materials
dc.keywordsDeformation AND Poisson ratio
dc.treeJournal of Engineering Materials and Technology:;2007:;volume( 129 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record