Show simple item record

dc.contributor.authorJ. Oh
dc.contributor.authorN. Katsube
dc.contributor.authorF. W. Brust
dc.date.accessioned2017-05-09T00:23:56Z
dc.date.available2017-05-09T00:23:56Z
dc.date.copyrightJanuary, 2007
dc.date.issued2007
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27092#1_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/135863
dc.description.abstractThis paper studies intergranular creep failure of high-temperature service material under a stress-controlled unbalanced cyclic loading condition. The experimentally verified Murakami–Ohno strain-hardening creep law and Norton’s creep law are incorporated into the Tvegaard’s axis-symmetric model for the constrained grain boundary rupture analysis. Based on the physically realistic Murakami–Ohno creep law, it is shown that the cavity growth becomes unconstrained upon the stress reversal from compression to tension. This leads to the prediction that the material life under a cyclic loading condition is shorter than that under a constant loading. Based on the classical Norton’s law, the predicted material life under a cyclic loading condition remains the same as that under a constant loading. The obtained numerical results qualitatively match recent experimental results by Arai, where the life under a cyclic loading can be much shorter than that under a constant loading. There are many cases where engineers use a simple Norton’s creep law because of its simplicity. The present work suggests that more physically realistic creep laws should be used when cyclic loading must be considered.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleStudies on the Effect of Cyclic Loading on Grain Boundary Rupture Time
dc.typeJournal Paper
dc.journal.volume129
dc.journal.issue1
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2400253
dc.journal.fristpage1
dc.journal.lastpage10
dc.identifier.eissn1528-8889
dc.keywordsCreep
dc.keywordsGrain boundaries
dc.keywordsStress
dc.keywordsCavities
dc.keywordsRupture
dc.keywordsFlow (Dynamics) AND Equations
dc.treeJournal of Engineering Materials and Technology:;2007:;volume( 129 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record