Show simple item record

dc.contributor.authorWei Tong
dc.contributor.authorNian Zhang
dc.date.accessioned2017-05-09T00:23:56Z
dc.date.available2017-05-09T00:23:56Z
dc.date.copyrightApril, 2007
dc.date.issued2007
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27095#332_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/135862
dc.description.abstractTemporal and spatial characteristics of serrated plastic flow or the so-called Portevin-Le Chatelier (PLC) deformation bands in a commercial Al-2.5%Mg sheet metal due to dynamic strain aging effects were investigated experimentally under quasi-static uniaxial tension. It was found that the thickness and width of test coupons, applied loading conditions (machine stiffness and crosshead speed), and mechanical polishing had an observable effect on the temporal characteristics of the serrated plastic flow while short and long interruptions during the tensile tests with stress relaxation and even completely unloading show minimal effects on the subsequent serrated flow behavior. Serrations in axial load in AA5052-H32 were found to associate with the appearance of discrete narrow deformation bands in the tensile test coupons with the bands aligned 59±1deg with respect to the tensile loading axis. The detailed strain distribution across the deformation bands showed a bell-like instead of steplike shape, indicating that the formation of these deformation bands was controlled by a local nucleation and growth process at a cross section in the polycrystalline sheet.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleOn Serrated Plastic Flow in an AA5052-H32 Sheet
dc.typeJournal Paper
dc.journal.volume129
dc.journal.issue2
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2712466
dc.journal.fristpage332
dc.journal.lastpage341
dc.identifier.eissn1528-8889
dc.keywordsDeformation
dc.keywordsStress
dc.keywordsMachinery
dc.keywordsThickness
dc.keywordsPolishing
dc.keywordsFlow (Dynamics) AND Stiffness
dc.treeJournal of Engineering Materials and Technology:;2007:;volume( 129 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record