Show simple item record

dc.contributor.authorSanjay Kumar Thakur
dc.contributor.authorK. Balasubramanian
dc.contributor.authorManoj Gupta
dc.date.accessioned2017-05-09T00:23:55Z
dc.date.available2017-05-09T00:23:55Z
dc.date.copyrightApril, 2007
dc.date.issued2007
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27095#194_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/135843
dc.description.abstractIn the present study, monolithic magnesium, nanosized SiC reinforced magnesium and nanosized hybrid (SiC+Al2O3) reinforced magnesium materials have been synthesized by using powder metallurgy route involving microwave sintering followed by hot extrusion. The results show that the monolithic and the reinforced magnesium materials have minimal porosity and the reinforced magnesium materials have fairly well distributed nanosized SiC and SiC+Al2O3 particles in the matrix. The thermo-mechanical property measured in terms of coefficient of thermal expansion of the reinforced magnesium shows dimensionally more stable magnesium as compared to monolithic magnesium. The hardness 0.2% YS and UTS were found to improve significantly after addition of nanosized SiC and nanosized hybrid SiC+Al2O3 particles to the magnesium, However, ductility measured in terms of failure strain was found to be marginally reduced. Fractography results showed the presence of brittle failure mode with cleavage steps on the fractured surface of the magnesium matrix.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleMicrowave Synthesis and Characterization of Magnesium Based Composites Containing Nanosized SiC and Hybrid (SiC+Al2O3) Reinforcements
dc.typeJournal Paper
dc.journal.volume129
dc.journal.issue2
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2400279
dc.journal.fristpage194
dc.journal.lastpage199
dc.identifier.eissn1528-8889
dc.keywordsMicrowaves
dc.keywordsComposite materials
dc.keywordsMeasurement
dc.keywordsParticulate matter
dc.keywordsMagnesium
dc.keywordsThermal expansion
dc.keywordsPorosity
dc.keywordsExtruding
dc.keywordsSintering
dc.keywordsFailure
dc.keywordsPowder metallurgy AND Ductility
dc.treeJournal of Engineering Materials and Technology:;2007:;volume( 129 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record