Show simple item record

dc.contributor.authorRimma Lapovok
dc.contributor.authorPeter D. Hodgson
dc.date.accessioned2017-05-09T00:23:54Z
dc.date.available2017-05-09T00:23:54Z
dc.date.copyrightJuly, 2007
dc.date.issued2007
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27098#407_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/135827
dc.description.abstractDespite the high demand for industrial applications of magnesium, the forming technology for wrought magnesium alloys is not fully developed due to the limited ductility and high sensitivity to the processing parameters. The processing window for magnesium alloys could be significantly widened if the lower-bound ductility (LBD) for a range of stresses, temperature, and strain rates was known. LBD is the critical strain at the moment of fracture as a function of stress state and temperature. Measurements of LBD are normally performed by testing in a hyperbaric chamber, which is highly specialized, complex, and rare equipment. In this paper an alternative approach to determine LBD is demonstrated using wrought magnesium alloy AZ31 as an example. A series of compression tests of bulge specimens combined with finite element simulation of the tests were performed. The LBD diagram was then deduced by backward calculation.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleDetermination of Lower-Bound Ductility for AZ31 Magnesium Alloy by Use of the Bulge Specimens
dc.typeJournal Paper
dc.journal.volume129
dc.journal.issue3
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2744400
dc.journal.fristpage407
dc.journal.lastpage413
dc.identifier.eissn1528-8889
dc.keywordsMagnesium alloys
dc.keywordsSimulation
dc.keywordsStress
dc.keywordsDuctility
dc.keywordsFracture (Materials)
dc.keywordsTemperature
dc.keywordsCompression
dc.keywordsFinite element analysis
dc.keywordsFracture (Process)
dc.keywordsForging
dc.keywordsTesting
dc.keywordsMagnesium
dc.keywordsHyperbaric chambers AND Deformation
dc.treeJournal of Engineering Materials and Technology:;2007:;volume( 129 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record