Show simple item record

dc.contributor.authorAmarendra Atre
dc.contributor.authorW. S. Johnson
dc.date.accessioned2017-05-09T00:23:53Z
dc.date.available2017-05-09T00:23:53Z
dc.date.copyrightJuly, 2007
dc.date.issued2007
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27098#356_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/135821
dc.description.abstractMuch of the fatigue damage in aircraft structures can be linked to the stress concentration arising at the rivet/skin interface in fuselage lap-joints. Fatigue damage can degrade the strength of the structure and reduce structural integrity. The stress distribution around the rivet holes, which depends on several loading conditions, is therefore of prime importance. Critical manufacturing process variations must be taken into account to observe the effect on local stresses at the hole. This paper presents three-dimensional (3D) nonlinear finite element analyses to investigate the stress state at rivet holes in fuselage lap joints. Initially, a 3D single rivet model of the riveting process was developed to characterize the unsymmetric residual stress distribution resulting from rivet installation. Then a global three-rivet model of the fuselage lap-joint, which takes into account the residual stresses from rivet installation and fuselage pressurization, was analyzed and compared to observations available from teardown inspection. The models were then implemented to observe the effects of rivet interference, sealant, and drill shavings on the stress state. A multiaxial fatigue criterion was implemented to predict cycles to crack nucleation for the modeled parameters. The effect of underdriven rivets and sealant were observed to be the most critical on the stress state of the fuselage splice. Excellent comparison with the damage characterization of the fuselage lap-joint provides validation to the finite element model.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleEffect of Interference on the Mechanics of Load Transfer in Aircraft Fuselage Lap Joints
dc.typeJournal Paper
dc.journal.volume129
dc.journal.issue3
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2744393
dc.journal.fristpage356
dc.journal.lastpage366
dc.identifier.eissn1528-8889
dc.keywordsSealants
dc.keywordsStress
dc.keywordsRivets
dc.keywordsRiveting
dc.keywordsSkin
dc.keywordsFracture (Materials)
dc.keywordsDrills (Tools)
dc.keywordsFriction AND Aircraft
dc.treeJournal of Engineering Materials and Technology:;2007:;volume( 129 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record