Show simple item record

dc.contributor.authorL. Liu
dc.contributor.authorJ. W. Holmes
dc.date.accessioned2017-05-09T00:23:53Z
dc.date.available2017-05-09T00:23:53Z
dc.date.copyrightOctober, 2007
dc.date.issued2007
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27101#594_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/135815
dc.description.abstractDetails are provided for an experimental approach to study the tensile fatigue crack growth behavior of very thin metallic foils. The technique utilizes a center-notched specimen and a hemispherical bearing alignment system to minimize bending strains. To illustrate the technique, the constant amplitude fatigue crack growth behavior of a Ni-base superalloy foil was studied at temperatures from 20°C to 760°C. The constant amplitude fatigue tests were performed at a frequency of 2Hz and stress ratio of 0.2. The crack growth rate versus stress intensity range data followed a Paris relation with a stress intensity range exponent m between 5 and 6; this exponent is significantly higher than what is commonly observed for thicker materials and indicates very rapid fatigue crack propagation rates can occur in thin metallic foils.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleExperimental Technique for Elevated Temperature Mode I Fatigue Crack Growth Testing of Ni-Base Metal Foils
dc.typeJournal Paper
dc.journal.volume129
dc.journal.issue4
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2772324
dc.journal.fristpage594
dc.journal.lastpage602
dc.identifier.eissn1528-8889
dc.keywordsTemperature
dc.keywordsStress
dc.keywordsFracture (Materials)
dc.keywordsFatigue cracks
dc.keywordsGeometry
dc.keywordsMetal foil
dc.keywordsTesting AND Bearings
dc.treeJournal of Engineering Materials and Technology:;2007:;volume( 129 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record