Show simple item record

dc.contributor.authorA. Gironès
dc.contributor.authorM. Anglada
dc.contributor.authorA. Mateo
dc.date.accessioned2017-05-09T00:23:52Z
dc.date.available2017-05-09T00:23:52Z
dc.date.copyrightOctober, 2007
dc.date.issued2007
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27101#588_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/135814
dc.description.abstractThe corrosion fatigue performance of a superduplex stainless steel in two different chloride-bearing solutions (30g∕l and 60g∕lNaCl) is explored in the present paper. Fatigue life results and surface damage analysis show a strong influence of the applied strain amplitude, as well as of the chloride content, on the cyclic response. Moreover, there is an interaction between both factors because corrosion fatigue mechanisms at low and high strain amplitudes are not comparable, since ferrite is only fully plastically active at high strains. Whereas a detrimental effect of the 30g∕lNaCl solution on the fatigue strength is observed, longer fatigue lives were attained in 60g∕lNaCl solution, even longer than in air. Surface damage inspection and residual solutions analysis support a critical anodic dissolution rate, which would act as a polishing effect, as the main reason for this unexpected result.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleChloride Content Effect on the Corrosion Fatigue Properties of Superduplex Stainless Steels
dc.typeJournal Paper
dc.journal.volume129
dc.journal.issue4
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2772325
dc.journal.fristpage588
dc.journal.lastpage593
dc.identifier.eissn1528-8889
dc.keywordsFatigue
dc.keywordsCarbon fibers
dc.keywordsFerrites (Magnetic materials)
dc.keywordsNucleation (Physics)
dc.keywordsFracture (Materials)
dc.keywordsBearings
dc.keywordsCorrosion
dc.keywordsFracture (Process)
dc.keywordsFatigue life
dc.keywordsStainless steel
dc.keywordsMechanisms
dc.keywordsCycles
dc.keywordsRupture
dc.keywordsFatigue properties
dc.keywordsSeawater AND Polishing
dc.treeJournal of Engineering Materials and Technology:;2007:;volume( 129 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record