Show simple item record

dc.contributor.authorA. Agrawal
dc.contributor.authorA. M. Karlsson
dc.date.accessioned2017-05-09T00:23:52Z
dc.date.available2017-05-09T00:23:52Z
dc.date.copyrightOctober, 2007
dc.date.issued2007
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27101#580_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/135813
dc.description.abstractWe investigate properties that govern interfacial fracture within the framework of linear elastic fracture mechanics, including interfacial fracture toughness, mode mixity, and the associated reference length. The reference length describes the arbitrary location where the mode mixity is evaluated, ahead of the crack tip, in a bimaterial system. A method for establishing a reference length that is fixed for a given bimaterial system is proposed. This is referred to as the “characteristic reference length,” with the associated “characteristic mode mixity.” The proposed method is illustrated with an experimental investigation, utilizing a four-point bend test of a bimaterial system.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleOn the Reference Length and Mode Mixity for a Bimaterial Interface
dc.typeJournal Paper
dc.journal.volume129
dc.journal.issue4
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2772340
dc.journal.fristpage580
dc.journal.lastpage587
dc.identifier.eissn1528-8889
dc.keywordsStress
dc.keywordsFracture (Process)
dc.keywordsToughness
dc.keywordsBending (Stress)
dc.keywordsEster
dc.keywordsFracture mechanics
dc.keywordsAluminum AND Fracture toughness
dc.treeJournal of Engineering Materials and Technology:;2007:;volume( 129 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record