Show simple item record

dc.contributor.authorDong Yang
dc.contributor.authorPreet M. Singh
dc.contributor.authorRichard W. Neu
dc.date.accessioned2017-05-09T00:23:52Z
dc.date.available2017-05-09T00:23:52Z
dc.date.copyrightOctober, 2007
dc.date.issued2007
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27101#559_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/135810
dc.description.abstractIndustrial boilers experience bulbous cracks in carbon steel water-wall tubes and other water-touched surfaces. Because these cracks are blunt and different from sharp fatigue cracks, they are generally referred to as stress-assisted corrosion (SAC) cracks. The performance of carbon steels in industrial boilers strongly depends on the formation and stability of the magnetite film on the waterside surface. To understand the mechanism for SAC crack initiation and propagation, slow strain rate tests were conducted in a recirculation autoclave under industrial boiler water conditions. The dissolved oxygen in the water was maintained from a negligible amount (5ppb) to 3ppm. The SAC crack initiation and propagation mechanism involves magnetite film damage and requires the presence of dissolved oxygen in the water. Increasing the test temperature accelerates the process. A mechanism for SAC cracking is proposed, and interrupted slow strain rate tests were carried out to validate this mechanism. Temperature and dissolved oxygen in boiler water are important factors in initiation and propagation of stress assisted corrosion cracks. SAC in boilers can be controlled by controlling the dissolved oxygen levels around 5ppb.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleInitiation and Propagation of Stress-Assisted Corrosion (SAC) Cracks in Carbon Steel Boiler Tubes
dc.typeJournal Paper
dc.journal.volume129
dc.journal.issue4
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2772330
dc.journal.fristpage559
dc.journal.lastpage566
dc.identifier.eissn1528-8889
dc.keywordsTemperature
dc.keywordsCarbon steel
dc.keywordsStress
dc.keywordsFracture (Materials)
dc.keywordsBoilers
dc.keywordsCorrosion
dc.keywordsFracture (Process)
dc.keywordsOxygen
dc.keywordsWater
dc.keywordsMechanisms AND Boiler tubes
dc.treeJournal of Engineering Materials and Technology:;2007:;volume( 129 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record