Show simple item record

dc.contributor.authorG. Georgiades
dc.contributor.authorS. O. Oyadiji
dc.contributor.authorX. Q. Zhu
dc.contributor.authorJ. R. Wright
dc.contributor.authorJ. T. Turner
dc.date.accessioned2017-05-09T00:23:51Z
dc.date.available2017-05-09T00:23:51Z
dc.date.copyrightOctober, 2007
dc.date.issued2007
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27101#497_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/135803
dc.description.abstractThis paper is on the characterization of the mechanical properties of Newtonian-type shock absorbing elastomeric composites. This composite material is a blend of elastomeric capsules or beads in a matrix of a Newtonian liquid. The material can be considered as a liquid analogy to elastomeric foams. It exhibits bulk compression characteristics and acts like an elastic liquid during an impact, unlike elastic foams, which exhibit uniaxial compression characteristics. A test cell consisting of an instrumented metal cylinder and a piston was designed. A sample of the material was placed in the instrumented cylinder, which was located at the base of a drop test rig. A drop mass of 17.3kg was subsequently released from a desired height to impact the piston. From measurements of the acceleration histories of the drop mass and the piston, and from the displacement history of the piston, the force-displacement curves and the associated impact energies absorbed were derived. These are compared to the corresponding characteristics derived from measurements of pressure of the fluid medium inside the cylinder. The results are compared for blends of different bead types, and the different aspects contributing to their performance are discussed. It is shown that the performance curves derived from the accelerometer measurements matched those derived from the pressure measurements. Blends of this composite material of different types of beads showed distinctively different characteristics.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleCharacterization of the Core Properties of a Shock Absorbing Composite
dc.typeJournal Paper
dc.journal.volume129
dc.journal.issue4
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2772323
dc.journal.fristpage497
dc.journal.lastpage504
dc.identifier.eissn1528-8889
dc.keywordsFluids
dc.keywordsComposite materials
dc.keywordsViscosity
dc.keywordsForce
dc.keywordsShock (Mechanics)
dc.keywordsCylinders
dc.keywordsPistons
dc.keywordsStress
dc.keywordsAccelerometers
dc.keywordsPressure
dc.keywordsDrops AND Silicones
dc.treeJournal of Engineering Materials and Technology:;2007:;volume( 129 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record