Show simple item record

dc.contributor.authorM. Gölcü
dc.contributor.authorN. Usta
dc.contributor.authorY. Pancar
dc.date.accessioned2017-05-09T00:23:30Z
dc.date.available2017-05-09T00:23:30Z
dc.date.copyrightSeptember, 2007
dc.date.issued2007
dc.identifier.issn0195-0738
dc.identifier.otherJERTD2-26547#169_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/135609
dc.description.abstractImpellers with splitter blades have been used in turbomachinery design for both pumps and compressors. Increasing the number of blades increases the head of the pump, however, it causes a decrease in efficiency due to the blockage effect of the blade thickness and friction. The impellers with splitter blades between two long blades can be used to alleviate the serious clogging at the inlet of the impeller caused by more blades. In this study, impellers having a different number of blades (z=3, 4, 5, 6, and 7) with and without splitter blades (25, 35, 50, 60, and 80% of the main blade length) were tested in a deep well pump. The effects of the main blade number and lengths of splitter blades on the pump performance have been investigated. While the number of main blades and the lengths of the splitter blades of a principal impeller were changed, the other parameters such as pump casing, blade inlet and outlet angles, blade thickness, impeller inlet and outlet diameters, were kept the same.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleEffects of Splitter Blades on Deep Well Pump Performance
dc.typeJournal Paper
dc.journal.volume129
dc.journal.issue3
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.2748810
dc.journal.fristpage169
dc.journal.lastpage176
dc.identifier.eissn1528-8994
dc.keywordsImpellers
dc.keywordsBlades AND Pumps
dc.treeJournal of Energy Resources Technology:;2007:;volume( 129 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record