Show simple item record

dc.contributor.authorHoussem Abdellatif
dc.contributor.authorMartin Grotjahn
dc.contributor.authorBodo Heimann
dc.date.accessioned2017-05-09T00:23:12Z
dc.date.available2017-05-09T00:23:12Z
dc.date.copyrightMay, 2007
dc.date.issued2007
dc.identifier.issn0022-0434
dc.identifier.otherJDSMAA-26393#294_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/135479
dc.description.abstractThe compensation for friction or joint losses in robotic manipulators contributes to an important improvement of the control quality. Besides appropriate friction modeling, experimental identification of the model parameters is fundamental toward better control performance. Conventionally steady-state friction characteristics are investigated for mechanical systems in the first step. However, and due to the high kinematic coupling, such procedure is already complicated for complex multiple closed-loop mechanisms, like parallel manipulators. Actuation friction of such mechanisms becomes configuration dependent. This paper presents a methodology that deals with such challenge. The kinematic coupling is regarded in the friction model and therefore in the design of the experimental identification. With the proposed strategy, it is possible to identify the steady-state friction parameters independently from any knowledge about inertial or rigid-body dynamics. Friction models for sensorless passive joints can also be provided. Besides, the method is kept very practical, since there is no need for any additional hardware devices or interfaces than a standard industrial control. The suitability for the industrial field is proven by experimental application to PaLiDA that is a six degrees of freedom parallel manipulator equipped with linear directly driven actuators.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleIndependent Identification of Friction Characteristics for Parallel Manipulators
dc.typeJournal Paper
dc.journal.volume129
dc.journal.issue3
dc.journal.titleJournal of Dynamic Systems, Measurement, and Control
dc.identifier.doi10.1115/1.2718242
dc.journal.fristpage294
dc.journal.lastpage302
dc.identifier.eissn1528-9028
dc.keywordsFriction
dc.keywordsManipulators
dc.keywordsModeling AND Force
dc.treeJournal of Dynamic Systems, Measurement, and Control:;2007:;volume( 129 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record