Show simple item record

dc.contributor.authorNakju Lett Doh
dc.contributor.authorWan Kyun Chung
dc.contributor.authorYongwhan Oh
dc.contributor.authorYoungil Youm
dc.date.accessioned2017-05-09T00:23:11Z
dc.date.available2017-05-09T00:23:11Z
dc.date.copyrightMay, 2007
dc.date.issued2007
dc.identifier.issn0022-0434
dc.identifier.otherJDSMAA-26393#262_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/135475
dc.description.abstractA hard contact is an impact that occurs when the robot contacts a stiff environment with a high velocity. In the pretransition phase of the hard contact, it is important to maintain stability while reducing succeeding force peaks and the duration time. For these purposes, we propose two control methods. One is a suppression controller that suppresses position rebounds in-between the impact time. The other is a flexible-damped joint with a joint damping controller. The flexible-damped joint is a new joint type designed to increase the hardware damping. It is controlled by a novel controller, called the joint damping controller, to enhance damping. The major advantage of the proposed methods is a guaranteed stability. The performance of the proposed methods is validated via several comparative experiments.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleTwo Transition Phase Control Methods for Hard Contact
dc.typeJournal Paper
dc.journal.volume129
dc.journal.issue3
dc.journal.titleJournal of Dynamic Systems, Measurement, and Control
dc.identifier.doi10.1115/1.2719766
dc.journal.fristpage262
dc.journal.lastpage274
dc.identifier.eissn1528-9028
dc.keywordsForce
dc.keywordsControl equipment
dc.keywordsDamping AND Stability
dc.treeJournal of Dynamic Systems, Measurement, and Control:;2007:;volume( 129 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record