Show simple item record

dc.contributor.authorChengying Xu
dc.contributor.authorYung C. Shin
dc.date.accessioned2017-05-09T00:23:10Z
dc.date.available2017-05-09T00:23:10Z
dc.date.copyrightJuly, 2007
dc.date.issued2007
dc.identifier.issn0022-0434
dc.identifier.otherJDSMAA-26397#480_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/135463
dc.description.abstractIn this paper, a multi-level fuzzy control (MLFC) technique is developed and implemented for a creep-feed grinding process. The grinding force is maintained at the maximum allowable level under varying depth of cut, so that the highest metal removal rate is achieved with a good workpiece surface quality. The control rules are generated heuristically without any analytical model of the grinding process. Based on the real-time force measurement, the control parameters are adapted automatically within a stable range. A National Instrument real-time control computer is implemented in an open architecture control system for the grinding machine. Experimental results show that the cycle time has been reduced by up to 25% over those without force control and by 10–20% compared with the conventional fuzzy logic controller, which indicates its effectiveness in improving the productivity of actual manufacturing processes. The effect of grinding wheel wear is also considered in the creep-feed grinding process, where the grinding force/power can be maintained around the specified value by the proposed MLFC controller as the wheel dulls gradually.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleControl of Cutting Force for Creep-Feed Grinding Processes Using a Multi-Level Fuzzy Controller
dc.typeJournal Paper
dc.journal.volume129
dc.journal.issue4
dc.journal.titleJournal of Dynamic Systems, Measurement, and Control
dc.identifier.doi10.1115/1.2718238
dc.journal.fristpage480
dc.journal.lastpage492
dc.identifier.eissn1528-9028
dc.keywordsForce
dc.keywordsControl equipment AND Grinding
dc.treeJournal of Dynamic Systems, Measurement, and Control:;2007:;volume( 129 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record