Show simple item record

dc.contributor.authorRichard W. Kent
dc.contributor.authorDmitry V. Balandin
dc.contributor.authorNikolai N. Bolotnik
dc.contributor.authorWalter D. Pilkey
dc.contributor.authorSergey V. Purtsezov
dc.date.accessioned2017-05-09T00:23:10Z
dc.date.available2017-05-09T00:23:10Z
dc.date.copyrightJuly, 2007
dc.date.issued2007
dc.identifier.issn0022-0434
dc.identifier.otherJDSMAA-26397#415_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/135457
dc.description.abstractThis study concerns a concept for an optimal control of the force developed in an automotive restraint system during a frontal impact. The concept is close to that of “smart” restraint systems and involves continuous control of the restraint force by moving the point of attachment of the restraint system to the vehicle or retracting and releasing the seat belts. The analytical foundation for the control of the restraining force does not appear to have been formulated prior to this study. The control design involves the limiting performance analysis of the isolation of an occupant from the crash impact and the formation of a feedback to sustain the open-loop control law that provides the limiting performance. Initially, the problem is outlined using a single-degree-of-freedom system and solved for optimal isolator characteristics. This exercise shows that the optimal force is constant and that the performance of a restraint system behaving as a linear spring is half as effective as the optimal. The methodology is then applied to a published thoracic model having multiple degrees of freedom. A set of functionals is defined as constraints corresponding to injury criteria and the displacement of the occupant relative to the vehicle. The characteristics of the optimal isolator force are then determined. It is shown that this force has a short-duration period of high magnitude early in the profile, followed by an interval of nearly constant force. Next it is shown that a restraint behaving as a linear spring can generate the optimal control force if its attachment point in the vehicle is allowed to move. The design of the control law for this motion involves the determination of an optimal open-loop control and the formation of a feedback to sustain this control. Forms for both of these are presented. A substantial improvement in the behavior of an automobile occupant’s restraint systems can be anticipated from an active control of the seat belt retraction.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleOptimal Control of Restraint Forces in an Automobile Impact
dc.typeJournal Paper
dc.journal.volume129
dc.journal.issue4
dc.journal.titleJournal of Dynamic Systems, Measurement, and Control
dc.identifier.doi10.1115/1.2718240
dc.journal.fristpage415
dc.journal.lastpage424
dc.identifier.eissn1528-9028
dc.keywordsForce
dc.keywordsMotion
dc.keywordsOptimal control
dc.keywordsFeedback
dc.keywordsWounds
dc.keywordsSprings
dc.keywordsRestraint systems
dc.keywordsVehicles AND Automobiles
dc.treeJournal of Dynamic Systems, Measurement, and Control:;2007:;volume( 129 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record