Show simple item record

dc.contributor.authorZ. F. Sang
dc.contributor.authorL. P. Xue
dc.contributor.authorG. E. O. Widera
dc.contributor.authorH. F. Wang
dc.date.accessioned2017-05-09T00:21:27Z
dc.date.available2017-05-09T00:21:27Z
dc.date.copyrightFebruary, 2006
dc.date.issued2006
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28463#49_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/134553
dc.description.abstractThe purpose of this work is to study the plastic limit load of pad reinforced cylindrical vessels with different d/D ratios under out-of-plane moment loading on a nozzle. Three full-scale test models were designed and fabricated. A 3-D nonlinear finite element numerical analysis was also performed. Data on plastic limit moment is obtained from load-displacement and load-strain responses. The results indicate that plastic limit loads determined by test (including displacement and strain measurements) and finite element analysis are in agreement.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titlePlastic Limit Loads of Pad Reinforced Cylindrical Vessels Under Out-of-Plane Moment of Nozzle
dc.typeJournal Paper
dc.journal.volume128
dc.journal.issue1
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.2140800
dc.journal.fristpage49
dc.journal.lastpage56
dc.identifier.eissn1528-8978
dc.keywordsStress
dc.keywordsNozzles
dc.keywordsDisplacement
dc.keywordsVessels AND Finite element analysis
dc.treeJournal of Pressure Vessel Technology:;2006:;volume( 128 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record