Show simple item record

dc.contributor.authorRobert H. Carter
dc.date.accessioned2017-05-09T00:21:25Z
dc.date.available2017-05-09T00:21:25Z
dc.date.copyrightMay, 2006
dc.date.issued2006
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28467#251_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/134538
dc.description.abstractDesigners of advanced gun systems have been tasked with increasing barrel life in the face of the extreme erosion and wear of the interior ballistics environment. The addition of refractory metal coatings, such as chromium or tantalum, have greatly boosted service life, but even with these applications the erosion resistance of the underlying gun steel is the service-life limiting factor. The U.S. Army Research Laboratory (ARL) is currently undertaking an effort to determine the feasibility of ceramic gun barrels. Ceramics are attractive for liner materials because of their high-temperature performance and erosion-resistance characteristics. Unfortunately, their drawbacks are low tensile strength, low fracture toughness, and brittle fracture. Previous research into the replacement of metals with a ceramic liner has met with limited success, at best, but advances in ceramic manufacturing technology, probabilistic design, and sheathing technology have led to renewed interest in this area. The work at ARL has focused on developing a material property database of commercially available ceramics, extensive finite element and analytic modeling, experimental verification, and, ultimately, demonstration of the ceramic gun barrel technology. This body of work will focus on the derivation of analytic models for an N-layered tube to calculate the Weibull failure probabilities for a ceramic liner. Model results are verified through high-pressure burst testing of blank and sheathed ceramic tubes. The application of the models as a design tool is explored by generating failure surface plots to investigate optimal geometries and prestress levels for a variety of different liner and sheath materials across various caliber systems.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleProbabilistic Modeling for Ceramic Lined Gun Barrels
dc.typeJournal Paper
dc.journal.volume128
dc.journal.issue2
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.2172966
dc.journal.fristpage251
dc.journal.lastpage256
dc.identifier.eissn1528-8978
dc.keywordsCeramics
dc.keywordsStress
dc.keywordsDesign
dc.keywordsModeling
dc.keywordsFailure
dc.keywordsProbability
dc.keywordsGun barrels AND Steel
dc.treeJournal of Pressure Vessel Technology:;2006:;volume( 128 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record