Show simple item record

dc.contributor.authorAnthony P. Parker
dc.contributor.authorChoon-Lai Tan
dc.date.accessioned2017-05-09T00:21:24Z
dc.date.available2017-05-09T00:21:24Z
dc.date.copyrightMay, 2006
dc.date.issued2006
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28467#227_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/134533
dc.description.abstractFatigue and leak-before-break calculations for a pressure vessel require knowledge of the stress intensity factor at the deepest point of a straight- or curved-fronted (semi-elliptical) surface crack emanating from the bore of an internally pressurized, autofrettaged thick cylinder. A limited number of available solutions is curve fitted. The concept of a tube equivalent plate (TEP), which exhibits crack-constraint characteristics matching those of a thick cylinder, is developed, and the resulting equations are curve fitted. Ratios of the TEP stress intensity factor results are then used to interpolate between certain existing solutions. This provides wide-ranging solutions covering radius ratios from 1.8 to 3.0, autofrettage overstrain from 0 to 100% and crack shapes from straight fronted to semi-circular. The calculation procedure is described using worked examples.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleStress Intensity Factors for Internal Straight and Curved-Fronted Cracks in Thick Cylinders
dc.typeJournal Paper
dc.journal.volume128
dc.journal.issue2
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.2172618
dc.journal.fristpage227
dc.journal.lastpage232
dc.identifier.eissn1528-8978
dc.keywordsStress
dc.keywordsFracture (Materials)
dc.keywordsCylinders
dc.keywordsAutofrettage
dc.keywordsPressure AND Surface cracks
dc.treeJournal of Pressure Vessel Technology:;2006:;volume( 128 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record