Show simple item record

dc.contributor.authorJames Gombas
dc.date.accessioned2017-05-09T00:21:22Z
dc.date.available2017-05-09T00:21:22Z
dc.date.copyrightAugust, 2006
dc.date.issued2006
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28470#414_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/134507
dc.description.abstractA circular flat plate with a perforated central region is to be formed by dies into a dome and then welded onto a cylindrical shell. After welding, the dome must be spherical within a narrow tolerance band. This plate forming and welding is simulated using large deflection theory elastic-plastic finite element analysis. The manufacturing assessment is performed so that the dies may be designed to compensate for plate distortions that occur during various stages of manufacturing, including the effects of weld distortion. The manufacturing simulation benchmarks against measurements taken at several manufacturing stages from existing hardware. The manufacturing simulation process can then be used for future applications of similar geometries.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleBenchmark of Plate Forming and Weld Distortion Process
dc.typeJournal Paper
dc.journal.volume128
dc.journal.issue3
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.2218345
dc.journal.fristpage414
dc.journal.lastpage419
dc.identifier.eissn1528-8978
dc.keywordsMeasurement
dc.keywordsWelding
dc.keywordsManufacturing
dc.keywordsSimulation
dc.keywordsDisplacement
dc.keywordsShapes
dc.keywordsShrinkage (Materials)
dc.keywordsFinite element analysis
dc.keywordsDeformation
dc.keywordsPipes
dc.keywordsForce AND Pressing (Garments)
dc.treeJournal of Pressure Vessel Technology:;2006:;volume( 128 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record