Show simple item record

dc.contributor.authorCaifu Qian
dc.contributor.authorChenghong Duan
dc.contributor.authorHongjie Yu
dc.contributor.authorHongwei Duan
dc.contributor.authorJunli Tian
dc.date.accessioned2017-05-09T00:21:21Z
dc.date.available2017-05-09T00:21:21Z
dc.date.copyrightAugust, 2006
dc.date.issued2006
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28470#408_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/134506
dc.description.abstractA three-dimensional parametrized finite element model is established for the nonlinear analysis of the hydraulically expanded tube-to-tubesheet joint. Distribution of the residual contact pressure on the contact surface between the tube and the tubesheet is investigated. It is found that sealing circular bands exist on the contact surface which enhance the sealing of the joint since the residual contact pressures on the sealing circular bands are higher than on other positions. The sealing circular bands are located close to the two ends of the hole when it is not grooved, but they are located at the two brinks of the groove for a grooved hole and in the latter case, the residual contact pressures are even higher, reflecting that the joint with a grooved tube-sheet hole is more capable of sealing. Experiments and finite element calculations for the pull-out force of the joint are also performed for different expansion pressures and groove widths. Results show that with the increase of the groove width, the measured pull-out force increases significantly and becomes larger and larger than the calculated one, which is owing to the scratch on the contact surface between the tube and tubesheet.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleReliability Study of the Hydraulically Expanded Tube-to-Tubesheet Joint
dc.typeJournal Paper
dc.journal.volume128
dc.journal.issue3
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.2222375
dc.journal.fristpage408
dc.journal.lastpage413
dc.identifier.eissn1528-8978
dc.keywordsForce
dc.keywordsPressure
dc.keywordsReliability
dc.keywordsFinite element analysis
dc.keywordsFinite element model AND Expansion joints
dc.treeJournal of Pressure Vessel Technology:;2006:;volume( 128 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record