Show simple item record

dc.contributor.authorMing Zhang
dc.contributor.authorChu-Hwa Lee
dc.contributor.authorYanyao Jiang
dc.date.accessioned2017-05-09T00:21:21Z
dc.date.available2017-05-09T00:21:21Z
dc.date.copyrightAugust, 2006
dc.date.issued2006
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28470#388_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/134503
dc.description.abstractAn experimental investigation was conducted to study the effects of clamped length and loading direction on the self-loosening behavior of bolted joints by using specially designed fixtures. The experiments mimicked two plates jointed by an M12×1.75 class 10.9 bolt and a nut. The joints were subjected to cyclic external loading. A constant preload of 25kN was used for all the experiments conducted. During an experiment, the relative displacement between the two clamped plates, δ, was a controlling parameter. The reduction in clamping force, the applied transverse load, and the nut rotation were measured cycle by cycle. The relationship between, Δδ∕2, the amplitude of the relative displacement between the two clamped plates, and, NL, the number of loading cycles to loosening is referred to as self-loosening curve and was obtained for different clamped lengths and applied load directions. Similar to a fatigue curve, an endurance limit can be identified from the self-loosening curve. It was found that increasing the clamped length can enhance the self-loosening endurance limits in terms of the controlled relative displacement of the two clamped plates. However, the load carrying capability was not influenced significantly due to the thickness of the clamped plates. For a given bolted jointed structure, an angle of the external load from the pure shearing direction resulted in an increase in self-loosening resistance.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleAn Experimental Investigation of the Effects of Clamped Length and Loading Direction on Self-Loosening of Bolted Joints
dc.typeJournal Paper
dc.journal.volume128
dc.journal.issue3
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.2217972
dc.journal.fristpage388
dc.journal.lastpage393
dc.identifier.eissn1528-8978
dc.keywordsForce
dc.keywordsRotation
dc.keywordsFatigue
dc.keywordsBolted joints
dc.keywordsKnudsen number
dc.keywordsPlates (structures)
dc.keywordsCycles
dc.keywordsDisplacement
dc.keywordsThickness
dc.keywordsEndurance limit
dc.keywordsElectrical resistance
dc.keywordsStress
dc.keywordsFriction AND Jigs and fixtures
dc.treeJournal of Pressure Vessel Technology:;2006:;volume( 128 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record