Show simple item record

dc.contributor.authorS. A. Karamanos
dc.contributor.authorA. M. Gresnigt
dc.contributor.authorD. Tsouvalas
dc.date.accessioned2017-05-09T00:21:20Z
dc.date.available2017-05-09T00:21:20Z
dc.date.copyrightAugust, 2006
dc.date.issued2006
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28470#348_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/134496
dc.description.abstractThe paper examines the nonlinear elastic-plastic response of internally pressurized 90 deg pipe elbows under in-plane and out-of-plane bending. Nonlinear shell elements from a general-purpose finite element program are employed to model the inelastic response of steel elbows and the adjacent straight parts. The numerical results are successfully compared with real-scale experimental measurements. The paper also presents a parametric study, aimed at investigating the effects of diameter-to-thickness ratio and moderate pressure levels on the ultimate bending capacity of 90 deg elbows, focusing on the failure mode (local buckling or cross-sectional flattening) and the maximum bending moment. Special attention is given to the response of 90 deg elbows under out-of-plane bending moments.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleUltimate Bending Capacity and Buckling of Pressurized 90 deg Steel Elbows
dc.typeJournal Paper
dc.journal.volume128
dc.journal.issue3
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.2217967
dc.journal.fristpage348
dc.journal.lastpage356
dc.identifier.eissn1528-8978
dc.keywordsPipes
dc.keywordsBuckling
dc.keywordsPressure
dc.keywordsSteel
dc.keywordsFailure
dc.keywordsFinite element analysis
dc.keywordsMeasurement
dc.keywordsThickness AND Shells
dc.treeJournal of Pressure Vessel Technology:;2006:;volume( 128 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record