Show simple item record

dc.contributor.authorFred V. Ellis
dc.date.accessioned2017-05-09T00:21:18Z
dc.date.available2017-05-09T00:21:18Z
dc.date.copyrightNovember, 2006
dc.date.issued2006
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28473#632_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/134479
dc.description.abstractA metallurgical failure analysis was performed for the stage 17 gas turbine rotating blade and stationary vane. Four pieces, including the failed rotating and stationary blades, were removed from the air-compressor section of a gas turbine. The damaged components were found during a borescope examination. The objectives were to determine the failure mechanism and to estimate an inspection interval. The measured chemical compositions of the rotating blade and stationary vane are consistent with that of 403 stainless steel. The failure mechanism for the rotating blade is fatigue based on the beach marks on the fracture surface and the transgranular cracking. The fatigue crack initiated at the trailing edge of the blade. The crack at the trailing edge is due to impact damage. The probable root cause of failure for the rotating blade is the loss of axial clearance between the stationary and rotating blades. Fatigue crack growth calculations were performed using the NASGRO computer program and the corner cracked plate geometry to estimate the inspection interval. The estimated inspection interval is of order of magnitude hours to days for failure by high-cycle fatigue crack growth.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleMetallurgical Failure Analysis of a Rotating Blade in the Compressor Section of a Gas Turbine
dc.typeJournal Paper
dc.journal.volume128
dc.journal.issue4
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.2172617
dc.journal.fristpage632
dc.journal.lastpage637
dc.identifier.eissn1528-8978
dc.keywordsFracture (Process)
dc.keywordsGas turbines
dc.keywordsBlades
dc.keywordsFailure
dc.keywordsFailure analysis
dc.keywordsFatigue cracks
dc.keywordsRotating blades
dc.keywordsCompressors
dc.keywordsInspection
dc.keywordsCycles
dc.keywordsAirfoils
dc.keywordsStainless steel
dc.keywordsFatigue AND Failure mechanisms
dc.treeJournal of Pressure Vessel Technology:;2006:;volume( 128 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record