Show simple item record

dc.contributor.authorHany F. Abdalla
dc.contributor.authorMaher Y. A. Younan
dc.contributor.authorMohammad M. Megahed
dc.date.accessioned2017-05-09T00:21:18Z
dc.date.available2017-05-09T00:21:18Z
dc.date.copyrightNovember, 2006
dc.date.issued2006
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28473#618_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/134476
dc.description.abstractIn this paper a simplified technique is presented to determine the shakedown limit load of a 90-degree pipe bend subjected to constant internal pressure and cyclic in-plane closing bending moment using the finite element method. The simplified technique determines the shakedown limit load without performing time consuming full elastic-plastic cyclic loading simulations or conventional iterative elastic techniques. Instead, the shakedown limit load is determined by performing two finite element analyses namely; an elastic analysis and an elastic-plastic analysis. By extracting the results of the two analyses, the shakedown limit load is determined through the calculation of the residual stresses developed in the pipe bend. In order to gain confidence in the simplified technique, the output shakedown limit moments are used to perform full elastic-plastic cyclic loading simulations to check for shakedown behavior of the pipe bend. The shakedown limit moments output by the simplified technique are used to generate the shakedown diagram of the pipe bend for a range of constant internal pressure magnitudes. The maximum moment carrying capacity (limit moment) the pipe bend can withstand and the elastic limit are also determined and imposed on the shakedown diagram of the pipe bend. In order to get acquainted with the simplified technique, it is applied beforehand to a bench mark shakedown problem namely, the Bree cylinder (, 1967, J. Strain Anal., 3, pp. 226–238) problem. The Bree cylinder is subjected to constant internal pressure and cyclic high heat fluxes across its wall. The results of the simplified technique showed very good correlation with the analytically determined Bree diagram of the cylinder.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleDetermination of Shakedown Limit Load for a 90-Degree Pipe Bend Using a Simplified Technique
dc.typeJournal Paper
dc.journal.volume128
dc.journal.issue4
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.2349575
dc.journal.fristpage618
dc.journal.lastpage624
dc.identifier.eissn1528-8978
dc.keywordsPressure
dc.keywordsStress
dc.keywordsCylinders AND Pipe bends
dc.treeJournal of Pressure Vessel Technology:;2006:;volume( 128 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record