Show simple item record

dc.contributor.authorJinzhu Tan
dc.contributor.authorY. J. Chao
dc.contributor.authorWenlong Huang
dc.date.accessioned2017-05-09T00:21:17Z
dc.date.available2017-05-09T00:21:17Z
dc.date.copyrightNovember, 2006
dc.date.issued2006
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28473#566_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/134470
dc.description.abstractA kinetics model for temper embrittlement was employed as the basis for predicting the fracture appearance transition temperature (FATT) of 2.25Cr-1Mo steel used for hot-wall hydrofining reactors. Various heat treatments were performed to obtain different degrees of temper embrittlement for the steel. Charpy V-notch impact tests and Auger electron spectroscopy analysis were performed on embrittled 2.25Cr-1Mo steels to establish the relation between the shift of FATT and the change in the concentration of phosphorus segregated in the grain boundary of the steel. Based on the model and test data, a method of predicting the FATT at service time t was developed for the 2.25Cr-1Mo steel. Good agreement is obtained when the predicted values are compared to test data from open literature.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titlePrediction of Fracture Appearance Transition Temperature of 2.25Cr-1Mo Steel Used in Hot-Wall Hydrofining Reactors
dc.typeJournal Paper
dc.journal.volume128
dc.journal.issue4
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.2349569
dc.journal.fristpage566
dc.journal.lastpage571
dc.identifier.eissn1528-8978
dc.keywordsSteel
dc.keywordsGrain boundaries
dc.keywordsPhase transition temperature
dc.keywordsFracture (Process) AND Embrittlement
dc.treeJournal of Pressure Vessel Technology:;2006:;volume( 128 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record