Show simple item record

dc.contributor.authorFu-Zhen Xuan
dc.contributor.authorShan-Tung Tu
dc.contributor.authorZhengdong Wang
dc.date.accessioned2017-05-09T00:21:17Z
dc.date.available2017-05-09T00:21:17Z
dc.date.copyrightNovember, 2006
dc.date.issued2006
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28473#556_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/134469
dc.description.abstractThe present work reports several new insights into creep crack growth performance and defect assessment of welded structures at elevated temperature. First of all, an equivalent homogeneous model based on the limit load analysis is proposed to reflect the mismatch effects of the base and weld metals, the geometrical dimension of weldment constituents and the location of the pre-existing defects. Secondly, using the proposed equivalent homogeneous model, an estimation methodology for the time-dependent fracture mechanics parameter C* is developed in conjunction with the reference stress (RS) method and the GE/EPRI scheme. Such an estimation method was validated by using nonlinear finite element analysis of 48 compact tension (CT) specimens with various degrees of mismatch in creep behavior and different width of the welding seam. After that, the applicability of C* measurement recommended in ASTM E 1457 is re-examined for the CT specimen with a mismatched cross-weld. From the limit load analysis, a series of modifications for experimental C* estimation equation from ASTM E 1457 is introduced based on the proposed equivalent homogeneous model. Finally, a failure assessment diagram (FAD)-based method is presented for the welded structures at high temperatures. The application of such an approach to a welded cylinder with an internal circumference crack under axial tension is also reported in this paper.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleTime-Dependent Fracture and Defect Assessment of Welded Structures at High Temperature
dc.typeJournal Paper
dc.journal.volume128
dc.journal.issue4
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.2349567
dc.journal.fristpage556
dc.journal.lastpage565
dc.identifier.eissn1528-8978
dc.keywordsCreep
dc.keywordsMetals
dc.keywordsStress
dc.keywordsFracture (Materials)
dc.keywordsFracture (Process)
dc.keywordsEquations
dc.keywordsHigh temperature
dc.keywordsBase metals
dc.keywordsFailure
dc.keywordsFinite element analysis
dc.keywordsTemperature
dc.keywordsCylinders
dc.keywordsGeometry AND ASTM International
dc.treeJournal of Pressure Vessel Technology:;2006:;volume( 128 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record