Show simple item record

dc.contributor.authorXu Chen
dc.contributor.authorBingjun Gao
dc.contributor.authorGang Chen
dc.date.accessioned2017-05-09T00:21:16Z
dc.date.available2017-05-09T00:21:16Z
dc.date.copyrightNovember, 2006
dc.date.issued2006
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28473#525_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/134464
dc.description.abstractWith a multi-axial test machine, ratcheting was studied experimentally for pressurized low carbon steel elbows under reversed bending. The maximum ratcheting strain occurred mainly in the hoop direction at flanks. Hoop ratcheting strain was found at intrados for individual specimen. No ratcheting strain was found at the extrados for all tests. Ratcheting strain rate grew with increase of the bending loading level at the same internal pressure or with an increase of internal pressure at the same bending load. Ratcheting simulation was performed by EPFEA with ANSYS in which Ohno-Wang and Chen-Jiao-Kim kinematic hardening rules were applied by user programing. By comparing with the experimental data, it is found that predicted results by the Chen-Jiao-Kim model simulates reasonably. Ratcheting boundary was determined by C-TDF method with the Chen-Jiao-Kim model.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleRatcheting Study of Pressurized Elbows Subjected to Reversed In-Plane Bending
dc.typeJournal Paper
dc.journal.volume128
dc.journal.issue4
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.2349562
dc.journal.fristpage525
dc.journal.lastpage532
dc.identifier.eissn1528-8978
dc.keywordsSimulation
dc.keywordsStress
dc.keywordsHardening
dc.keywordsPressure
dc.keywordsMachinery
dc.keywordsPipes AND Carbon steel
dc.treeJournal of Pressure Vessel Technology:;2006:;volume( 128 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record