Show simple item record

dc.contributor.authorY.-B. Yi
dc.contributor.authorA. M. Sastry
dc.contributor.authorC.-W. Wang
dc.date.accessioned2017-05-09T00:20:06Z
dc.date.available2017-05-09T00:20:06Z
dc.date.copyrightJanuary, 2006
dc.date.issued2006
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27078#73_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/133821
dc.description.abstractIncreased thermal conductivity, electronic conductivity, and reversible capacity (i.e., reduced irreversible capacity loss, or ICL) have been demonstrably achievable by compression of anodes into higher volume fraction plates, though excessive compression can impair Li-ion battery performance. In our previous study, we correlated conductivity and compression of these materials. Here, we further investigated the effects of friction and deformability of particles on the compressibility of model carbons of Li-ion anodes. First, we implemented a statistically unbiased technique for generating a range of random particulate systems, from permeable to impermeable arrangements, along with a contact model for randomly arranged triaxial ellipsoidal particles, suitable for implementation in finite element analysis of compression of a random, porous system. We then quantified the relationship between interfacial friction and jamming fraction in spherical to ellipsoidal systems and applied these models to correlate maximum stresses and different frictional coefficients, with morphology (obtained by image analysis) of graphite particles in Li-ion anodes. The simulated results were compared with the experiments, showing that the friction coefficient in the system is close to 0.1 and that the applied pressure above 200kg∕cm2(200MPa) can damage the materials in SL-20 electrodes. We also conclude that use of maximum jamming fractions to assess likely configuration of mixtures is unrealistic, at best, in real manufacturing processes. Particles change both their overall shapes and relative orientations during deformation sufficient to alter the composite properties: indeed, it is alteration of properties that motivates post-processing at all. Thus, consideration of material properties, or their estimation post facto, using inverse techniques, is clearly merited in composites having volume fractions of particles near percolation onset.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleCompression of Packed Particulate Systems: Simulations and Experiments in Graphitic Li-ion Anodes
dc.typeJournal Paper
dc.journal.volume128
dc.journal.issue1
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2130733
dc.journal.fristpage73
dc.journal.lastpage80
dc.identifier.eissn1528-8889
dc.keywordsFriction
dc.keywordsAnodes
dc.keywordsParticulate matter
dc.keywordsCompression AND Graphite
dc.treeJournal of Engineering Materials and Technology:;2006:;volume( 128 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record