Show simple item record

dc.contributor.authorRebecca B. Dupaix
dc.contributor.authorDwarak Krishnan
dc.date.accessioned2017-05-09T00:20:05Z
dc.date.available2017-05-09T00:20:05Z
dc.date.copyrightJanuary, 2006
dc.date.issued2006
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27078#28_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/133815
dc.description.abstractRecently, a hyperelastic-viscoplastic constitutive model was developed for PET and the noncrystallizing copolymer PETG (, Ph.D. thesis, MIT, 2003). The materials were found to behave very similarly under monotonic loading conditions and the single constitutive model was able to capture both materials’ behavior. However, differences were observed upon unloading, and it is expected that additional differences would be observed under more complex loading conditions. Here their behavior is investigated under nonmonotonic loading conditions, specifically under load-hold conditions. The model of Dupaix and Boyce (, Ph.D. thesis, MIT, 2003) is modified to include Ahzi’s upper-bound model for strain-induced crystallization [, Mech. Mater., 35(12), pp. 1139–1148 (2003)]. The crystallization model is adapted to include criteria for the onset of strain-induced crystallization which depend on strain rate and level of deformation. The strain-rate condition prevents crystallization from beginning prior to the deformation process slowing significantly. The level-of-deformation condition delays crystallization until the material has deformed beyond a critical level. The combined model demonstrates differences in behavior between PET and PETG during complex loading situations, indicating its ability to capture the fundamental criteria for the onset of strain-induced crystallization.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleA Constitutive Model for Strain-Induced Crystallization in Poly(ethylene terephthalate) (PET) during Finite Strain Load-Hold Simulations
dc.typeJournal Paper
dc.journal.volume128
dc.journal.issue1
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.1924564
dc.journal.fristpage28
dc.journal.lastpage33
dc.identifier.eissn1528-8889
dc.keywordsCrystallization
dc.keywordsElectrical resistance
dc.keywordsStress
dc.keywordsConstitutive equations
dc.keywordsDeformation
dc.keywordsTemperature
dc.keywordsEngineering simulation AND Networks
dc.treeJournal of Engineering Materials and Technology:;2006:;volume( 128 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record