Show simple item record

dc.contributor.authorY. H. Moon
dc.contributor.authorC. J. Van Tyne
dc.contributor.authorD. I. Hyun
dc.date.accessioned2017-05-09T00:20:05Z
dc.date.available2017-05-09T00:20:05Z
dc.date.copyrightApril, 2006
dc.date.issued2006
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27082#243_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/133808
dc.description.abstractIn cathode ray tubes, a tension is imposed into the shadow mask during manufacturing to avoid slight variations in the position due to in service temperatures or deformation. Initially, tension is imparted to the shadow mask after it is welded to the compressed mask frame and the frame is allowed to retract. Subsequently, during further processing of the cathode ray tube, the tensioned shadow mask is subjected to heating. The heating causes some of the tension to decrease due to stress relaxation phenomenon associated with heating and creep. In the present study, the tension variation during manufacturing has been analyzed and the appropriate material characteristics and processing conditions to assure a more stable shadow mask for final service are suggested.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleAnalysis of Shadow Mask Tension Subjected to Thermal and Mechanical Loads
dc.typeJournal Paper
dc.journal.volume128
dc.journal.issue2
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2172627
dc.journal.fristpage243
dc.journal.lastpage247
dc.identifier.eissn1528-8889
dc.keywordsStress
dc.keywordsStructural frames
dc.keywordsShades and shadows
dc.keywordsMasks
dc.keywordsTension
dc.keywordsTemperature
dc.keywordsCreep AND Cooling
dc.treeJournal of Engineering Materials and Technology:;2006:;volume( 128 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record