• Login
    View Item 
    •   DSpace Home
    • ASME
    • Journal of Engineering Materials and Technology
    • View Item
    •   DSpace Home
    • ASME
    • Journal of Engineering Materials and Technology
    • View Item
    JavaScript is disabled for your browser. Some features of this site may not work without it.

    Instrumented Microindentation of Nanoporous Alumina Films

    Thumbnail
    View/Open
    JEMTA8-27082#225_1.pdf (1.052Mb)
    Date
    2006
    Author
    Ken Gall
    Dmitri Routkevitch
    Dudley S. Finch
    Yiping Liu
    Metadata
    Show full item record
    Abstract
    We examine the mechanical behavior of anodic alumina thin films with organized nanometer-scale porosity. The cylindrical pores in the alumina film are arranged perpendicular to the film thickness in a near-perfect triangular lattice. The films used in this work had pore diameters ranging from 35 to 75nm, and volume fractions ranging from 10% to 45%. Films with both amorphous and crystalline structures were considered. Mechanical properties of the thin films were studied using an instrumented indentor to measure the force-depth response of the films during indentation or the force-deflection response of micromachined beams in bending. The films showed increasing hardness/modulus with a decrease in pore volume fraction or transformation from amorphous to a polycrystalline alpha-alumina phase. The asymmetric films show higher hardness and modulus on their barrier side (with closed pores) relative to their open pore side. The force-depth response, measured with a spherical ball indentor, demonstrates fairly good agreement with an elastic Hertzian contact solution. The force-depth response, measured with a sharp Vickers indentor, shows an elastoplastic response. Microcracking at the corners of sharp indentations was not observed in amorphous nanoporous films, and rarely in harder, crystalline nanoporous films. High-resolution scanning electron microscopy revealed a collapse of the nanoporous structure beneath the indentor tip during sharp indentation. The results are discussed in light of continuum-based models for the elastic properties of porous solids. In general, the models are not capable of predicting the change in modulus of the films, given pore volume fraction and the properties of bulk crystalline alumina.
    URI
    http://yetl.yabesh.ir/yetl/handle/yetl/133806
    Collections
    • Journal of Engineering Materials and Technology

    DSpace software copyright © 2002-2015  DuraSpace
    Contact Us | Send Feedback
    Theme by 
    @mire NV
     

     

    Browse

    All of DSpaceCommunities & CollectionsBy Issue DateAuthorsTitlesSubjectsThis CollectionBy Issue DateAuthorsTitlesSubjects

    My Account

    LoginRegister

    Statistics

    View Usage Statistics

    DSpace software copyright © 2002-2015  DuraSpace
    Contact Us | Send Feedback
    Theme by 
    @mire NV