Show simple item record

dc.contributor.authorJohn Bayldon
dc.contributor.authorZdeněk P. Bažant
dc.contributor.authorIsaac M. Daniel
dc.contributor.authorQiang Yu
dc.date.accessioned2017-05-09T00:20:04Z
dc.date.available2017-05-09T00:20:04Z
dc.date.copyrightApril, 2006
dc.date.issued2006
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27082#169_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/133799
dc.description.abstractPrismatic sandwich specimens of various sizes, geometrically scaled in the ratio 1:2:4:8, are subjected to eccentric axial compression and tested to failure. The sandwich core consists of a closed-cell polyvinyl chloride foam, and the facesheets are woven glass-epoxy laminates, scaled by increasing the number of plies. The test results reveal a size effect on the mean nominal strength, which is strong enough to require consideration in design. The size effect observed is fitted with the size effect law of the energetic (deterministic) size effect theory. However, because of inevitable scatter and limited testing range, the precise form of the energetic size effect law to describe the test results is not unambiguous. The Weibull-type statistical size effect on the mean strength is ruled out because the specimens had small notches which caused the failure to occur in only one place in the specimen, and also because the observed failure mode was kink band propagation, previously shown to cause energetic size effect. Various fallacies in previous applications of Weibull theory to composites are also pointed out.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleSize Effect on Compressive Strength of Sandwich Panels with Fracture of Woven Laminate Facesheet
dc.typeJournal Paper
dc.journal.volume128
dc.journal.issue2
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2172277
dc.journal.fristpage169
dc.journal.lastpage174
dc.identifier.eissn1528-8889
dc.keywordsLaminates
dc.keywordsSize effect
dc.keywordsFailure AND Fracture (Process)
dc.treeJournal of Engineering Materials and Technology:;2006:;volume( 128 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record