Show simple item record

dc.contributor.authorMineo Nozaki
dc.contributor.authorMasao Sakane
dc.contributor.authorYutaka Tsukada
dc.contributor.authorHideo Nishimura
dc.date.accessioned2017-05-09T00:20:03Z
dc.date.available2017-05-09T00:20:03Z
dc.date.copyrightApril, 2006
dc.date.issued2006
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27082#142_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/133795
dc.description.abstractThis paper studies the creep-fatigue life evaluation of Sn-3.5Ag solder under push-pull loading using fast-fast, fast-slow, slow-fast, slow-slow, and strain-hold strain waves. Extensive creep-fatigue data were generated using these strain waves and the applicability of four conventional creep-fatigue damage rules, the linear damage rule, the frequency modified fatigue life, the ductility exhaustion model, and the strain range partitioning method, was examined. No conventional damage rules evaluated creep-fatigue lives accurately. Only the grain boundary sliding model, developed recently for solders, predicted creep-fatigue lives with a small scatter.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleCreep-Fatigue Life Evaluation for Sn-3.5Ag Solder
dc.typeJournal Paper
dc.journal.volume128
dc.journal.issue2
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2172273
dc.journal.fristpage142
dc.journal.lastpage150
dc.identifier.eissn1528-8889
dc.keywordsCreep
dc.keywordsFatigue
dc.keywordsSolders
dc.keywordsWaves AND Grain boundaries
dc.treeJournal of Engineering Materials and Technology:;2006:;volume( 128 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record