Show simple item record

dc.contributor.authorB. P. Conner
dc.contributor.authorT. Nicholas
dc.date.accessioned2017-05-09T00:20:03Z
dc.date.available2017-05-09T00:20:03Z
dc.date.copyrightApril, 2006
dc.date.issued2006
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27082#133_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/133794
dc.description.abstractFretting fatigue damage can reduce the service life of engineering components in contact. The attachment between blades and disks in the fan and compressor stages of gas turbine engines is often a dovetail geometry. As a result, normal and tangential cyclic contact loads are present. Results of fretting fatigue tests using a new dovetail fixture are detailed here. Dovetail specimens and three types of contact pads were all machined out of Ti−6A1−4V. Two types of palliatives are also examined: aluminum bronze coatings and low-plasticity burnishing. While the palliatives were effective in increasing the fatigue life, the three pad geometries produced essentially the same fatigue life.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleUsing a Dovetail Fixture to Study Fretting Fatigue and Fretting Palliatives
dc.typeJournal Paper
dc.journal.volume128
dc.journal.issue2
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2172272
dc.journal.fristpage133
dc.journal.lastpage141
dc.identifier.eissn1528-8889
dc.keywordsFatigue
dc.keywordsStress
dc.keywordsJigs and fixtures
dc.keywordsCoatings
dc.keywordsCycles
dc.keywordsGeometry
dc.keywordsFailure
dc.keywordsPlasticity AND Knudsen number
dc.treeJournal of Engineering Materials and Technology:;2006:;volume( 128 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record