Show simple item record

dc.contributor.authorJason McCormick
dc.contributor.authorDavide Fugazza
dc.contributor.authorFerdinando Auricchio
dc.contributor.authorReginald DesRoches
dc.date.accessioned2017-05-09T00:20:02Z
dc.date.available2017-05-09T00:20:02Z
dc.date.copyrightJuly, 2006
dc.date.issued2006
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27084#294_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/133785
dc.description.abstractSuperelastic NiTi shape memory alloy (SMA) wires and bars are studied to determine their damping and recentering capability for applications in the structural control of buildings subjected to earthquake loadings. These studies improve the knowledge base in regard to the use of SMAs in seismic design and retrofit of structures. The results show that the damping properties of austenitic SMAs are generally low. However, the residual strain obtained after loading to 6% strain is typically <0.75%. In general, it is shown that large diameters bars perform as well as wire specimens used in non-civil-engineering applications. The results of a small-scale shake table test are then presented as a proof of concept study of a SMA cross-bracing system. These results are verified through analytical nonlinear time history analysis. Finally, a three-story steel frame implementing either a traditional steel buckling-allowed bracing system or a SMA bracing system is analyzed analytically to determine if there is an advantage to using a SMA bracing system. The results show that the SMA braces improve the response of the braced frames.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleSeismic Vibration Control Using Superelastic Shape Memory Alloys
dc.typeJournal Paper
dc.journal.volume128
dc.journal.issue3
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2203109
dc.journal.fristpage294
dc.journal.lastpage301
dc.identifier.eissn1528-8889
dc.keywordsSteel
dc.keywordsWire
dc.keywordsShape memory alloys
dc.keywordsStructural frames
dc.keywordsBracing (Construction)
dc.keywordsVibration control
dc.keywordsDamping
dc.keywordsEarthquakes
dc.keywordsNickel titanium alloys
dc.keywordsBuckling AND Stress
dc.treeJournal of Engineering Materials and Technology:;2006:;volume( 128 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record