Show simple item record

dc.contributor.authorDouglas E. Burkes
dc.contributor.authorJohn J. Moore
dc.date.accessioned2017-05-09T00:20:02Z
dc.date.available2017-05-09T00:20:02Z
dc.date.copyrightJuly, 2006
dc.date.issued2006
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27084#445_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/133776
dc.description.abstractCombustion synthesis (CS) is an alternative technique for producing advanced materials and is dependent upon a highly exothermic chemical reaction to become self-sustaining after only a short energy pulse is applied to initiate the reaction. A NiTi-TiCx functionally graded material (FGM) was investigated that combines superelastic and shape memory capabilities of NiTi with the high hardness, wear, and corrosion resistance of TiCx. CS was employed to produce a FGM from 100% TiCx ceramic to 100% NiTi intermetallic. Temperature and burning velocity data of the CS reaction were recorded. XRD of the final product layers was conducted to determine phase composition. The combustion temperature, burning velocity, and cooling rate in each layer decreased with increasing NiTi content. Large blowholes were present in the high NiTi content layers as a result of outgassing of volatile species from the reactant powders. XRD analysis revealed the presence of Ni-Ti intermetallics along with a substoichiometric TiC (TiC0.7). Production of a NiTi-TiCx FGM is possible through use of a CS reaction employing the propagating mode (SHS). The material layers were observed as functionally graded in both composition and porosity.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleCombustion Synthesis of a Functionally Graded NiTi-TiCx Composite
dc.typeJournal Paper
dc.journal.volume128
dc.journal.issue3
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2204950
dc.journal.fristpage445
dc.journal.lastpage450
dc.identifier.eissn1528-8889
dc.keywordsTemperature
dc.keywordsCombustion
dc.keywordsComposite materials
dc.keywordsFunctionally graded materials
dc.keywordsNickel titanium alloys
dc.keywordsIntermetallic compounds AND Cooling
dc.treeJournal of Engineering Materials and Technology:;2006:;volume( 128 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record