Show simple item record

dc.contributor.authorRussell J. McDonald
dc.contributor.authorPeter Kurath
dc.date.accessioned2017-05-09T00:20:01Z
dc.date.available2017-05-09T00:20:01Z
dc.date.copyrightJuly, 2006
dc.date.issued2006
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27084#401_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/133772
dc.description.abstractThermal cycling has been experimentally demonstrated to diminish the performance of many reinforced materials. The coefficient of thermal expansion mismatch is the driving force for the development of high self-equilibrating stresses and strains in the vicinity of the reinforcement. To glean the magnitude of these stresses, a simple geometry, a spherical particulate (SiC) in a spherical domain (aluminum W319) was investigated. A set of partitioned strain rate equations considered temperature dependent material properties for thermal, elastic, mechanical plastic, and creep plastic deformation. The mechanical plasticity model utilized an improved Armstrong-Fredrick kinematic hardening algorithm and a Fisher type rate dependent yield criteria. A hyperbolic sine relation proposed by (1954, “ Some Fundamental Experiments on High Temperature Creep,” J. Mech. Phys. Solids, 3, pp. 85–116) was used to model creep deformation. A multidimensional residual stress state due to cooling from the molten state was considered in the simulations. Two damage parameters, Findley and equivalent plastic strain, were employed to estimate cyclic damage. While the life estimates are crude, they both predict finite lives for reasonable service temperature ranges.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleDeformation and Life Estimates for a Metal Matrix—Spherical Particulate Subjected to Thermomechanical Loading
dc.typeJournal Paper
dc.journal.volume128
dc.journal.issue3
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2209649
dc.journal.fristpage401
dc.journal.lastpage418
dc.identifier.eissn1528-8889
dc.keywordsDeformation
dc.keywordsCreep
dc.keywordsTemperature
dc.keywordsComposite materials
dc.keywordsParticulate matter
dc.keywordsStress
dc.keywordsEngineering simulation
dc.keywordsCooling
dc.keywordsMechanisms AND Fatigue
dc.treeJournal of Engineering Materials and Technology:;2006:;volume( 128 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record