Show simple item record

dc.contributor.authorBrajabandhu Pradhan
dc.contributor.authorSaroja Kanta Panda
dc.date.accessioned2017-05-09T00:20:01Z
dc.date.available2017-05-09T00:20:01Z
dc.date.copyrightJuly, 2006
dc.date.issued2006
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27084#383_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/133770
dc.description.abstractThe present study encompasses the thermoelastic effect of material anisotropy and curing stresses on interlaminar embedded elliptical delamination fracture characteristics in multiply laminated fiber-reinforced polymeric (FRP) composites. Two sets of full three-dimensional finite element analyses have been performed to calculate the displacements and interlaminar stresses along the delaminated interface responsible for the delamination onset and propagation. Modified crack closure integral methods based on the concepts of linear elastic fracture mechanics have been followed to evaluate the individual modes of strain energy release rates along the delamination front. It is shown that the individual modes of energy release rates vary along the delamination front depending on the ply sequence, orientation, and thermoelastic material anisotropy of the constituting laminae. This causes the anisotropic and non-self similar delamination propagation along the interface. The asymmetric and nonuniform variations in the nature of energy release rate plots obtained in a thermomechanical loading environment are significant when curing stress effects are included in the numerical analysis and hence should be taken into account in the designs of laminated FRP composite structures.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleEffect of Material Anisotropy and Curing Stresses on Interface Delamination Propagation Characteristics in Multiply Laminated FRP Composites
dc.typeJournal Paper
dc.journal.volume128
dc.journal.issue3
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2203100
dc.journal.fristpage383
dc.journal.lastpage392
dc.identifier.eissn1528-8889
dc.keywordsComposite materials
dc.keywordsLaminates
dc.keywordsStress
dc.keywordsCuring
dc.keywordsFiber reinforced plastics
dc.keywordsDelamination AND Anisotropy
dc.treeJournal of Engineering Materials and Technology:;2006:;volume( 128 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record