Show simple item record

dc.contributor.authorZdeněk P. Bažant
dc.contributor.authorYong Zhou
dc.contributor.authorIsaac M. Daniel
dc.contributor.authorFerhun C. Caner
dc.contributor.authorQiang Yu
dc.date.accessioned2017-05-09T00:20:01Z
dc.date.available2017-05-09T00:20:01Z
dc.date.copyrightJuly, 2006
dc.date.issued2006
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27084#366_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/133767
dc.description.abstractExperiments on size effect on the failure loads of sandwich beams with PVC foam core and skins made of fiber-polymer composite are reported. Two test series use beams with notches at the ends cut in the foam near the top or bottom interface, and the third series uses beams without notches. The results demonstrate that there is a significant nonstatistical (energetic) size effect on the nominal strength of the beams, whether notched or unnotched. The observed size effect shows that the failure loads can be realistically predicted on the basis of neither the material strength concept nor linear elastic fracture mechanics (LEFM). It follows that nonlinear cohesive (quasi-brittle) fracture mechanics, or its approximation by equivalent LEFM, must be used to predict failure realistically. Based on analogy with the previous asymptotic analysis of energetic size effect in other quasibrittle materials, approximate formulas for the nominal strength of notched or unnotched sandwich beams are derived using the approximation by equivalent LEFM. Different formulas apply to beams with notches simulating pre-existing stress-free (fatigued) cracks, and to unnotched beams failing at crack initiation. Knowledge of these formulas makes it possible to identify from size effect experiments both the fracture energy and the effective size of the fracture process zone.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleSize Effect on Strength of Laminate-Foam Sandwich Plates
dc.typeJournal Paper
dc.journal.volume128
dc.journal.issue3
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2194557
dc.journal.fristpage366
dc.journal.lastpage374
dc.identifier.eissn1528-8889
dc.treeJournal of Engineering Materials and Technology:;2006:;volume( 128 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record