Show simple item record

dc.contributor.authorMagnus Östlund
dc.date.accessioned2017-05-09T00:19:59Z
dc.date.available2017-05-09T00:19:59Z
dc.date.copyrightOctober, 2006
dc.date.issued2006
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27088#495_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/133745
dc.description.abstractThis paper concerns the drying process in the manufacturing of paperboard. Of particular interest are the effects of through-thickness property variation in paperboard during drying. In addition, resulting average properties from different drying histories are discussed. A mathematical model of the drying process is presented. It allows the moisture and temperature histories, the stress and strain histories, and the buildup of mechanical properties to be simulated. The temperature of the heating medium, the humidity and pressure of the ambient air, and either applied loads or prescribed strains are required input data. For symmetric convective drying, the ambient temperature, the humidity, and the thickness of the board were varied. For drying on a heated plate, the temperature of the plate and the thickness of the board were varied. Results regarding the moisture history, the stiffness development, and the buildup of residual stresses are presented and compared to literature experimental data. Also, sheets with a varying fiber base through the thickness, which affects both the moisture history and the influence of moisture on shrinkage, were studied. The model was shown to yield predictions qualitatively inline with empirical knowledge.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleModeling the Influence of Drying Conditions on the Stress Buildup During Drying of Paperboard
dc.typeJournal Paper
dc.journal.volume128
dc.journal.issue4
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2345440
dc.journal.fristpage495
dc.journal.lastpage502
dc.identifier.eissn1528-8889
dc.keywordsDrying
dc.keywordsStress
dc.keywordsPaperboard AND Stiffness
dc.treeJournal of Engineering Materials and Technology:;2006:;volume( 128 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record