Show simple item record

dc.contributor.authorAlan L. T. Wang
dc.contributor.authorJohn F. Stubington
dc.contributor.authorJiangang Xu
dc.date.accessioned2017-05-09T00:19:41Z
dc.date.available2017-05-09T00:19:41Z
dc.date.copyrightJune, 2006
dc.date.issued2006
dc.identifier.issn0195-0738
dc.identifier.otherJERTD2-26536#111_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/133596
dc.description.abstractA bench-scale fluidized bed combustor with a novel fluidizing gas injection manifold was successfully built for characterization of Australian black coals under PFBC conditions. Instead of the usual horizontal distributor plate to support the bed and distribute the fluidizing gas, the fluidizing gas was injected horizontally through 8 radial ports in the cylindrical wall of the combustor. To verify satisfactory hydrodynamic performance with the novel gas injection manifold, the fluidization was directly investigated by measuring differential pressure fluctuations under both ambient and PFBC conditions. In addition, a Perspex cold model was built to simulate the hydrodynamics of the hot bed in the PFBC facility. Under PFBC conditions, the bed operated in a stable bubbling regime and the solids were well mixed. The bubbles in the bed were effectively cloudless and no gas backmixing or slugging occurred; so the gas flow in the bed could be modeled by assuming two phases with plug flow through each phase. The ratio of Umf for the simulated bed to Umf for the hot PFBC bed matched the conditions proposed by Glicksman’s scaling laws. The bubbles rose along the bed with axial and lateral movements, and erupted from the bed surface evenly and randomly at different locations. Two patterns of particle movement were observed in the cold model bed: a circular pattern near the top section and a rising and falling pattern dominating in the lower section.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleHydrodynamic Performance of a Novel Design of Pressurized Fluidized Bed Combustor
dc.typeJournal Paper
dc.journal.volume128
dc.journal.issue2
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.2126987
dc.journal.fristpage111
dc.journal.lastpage117
dc.identifier.eissn1528-8994
dc.keywordsParticulate matter
dc.keywordsFluidization
dc.keywordsPressure
dc.keywordsCombustion chambers
dc.keywordsDesign
dc.keywordsFluidized beds
dc.keywordsCoal
dc.keywordsFlow (Dynamics)
dc.keywordsScaling laws (Mathematical physics)
dc.keywordsBubbles
dc.keywordsFluctuations (Physics) AND Manifolds
dc.treeJournal of Energy Resources Technology:;2006:;volume( 128 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record