Show simple item record

dc.contributor.authorGregory J. Kowalski
dc.contributor.authorMansour Zenouzi
dc.date.accessioned2017-05-09T00:19:40Z
dc.date.available2017-05-09T00:19:40Z
dc.date.copyrightSeptember, 2006
dc.date.issued2006
dc.identifier.issn0195-0738
dc.identifier.otherJERTD2-26538#168_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/133583
dc.description.abstractA generalized thermodynamic model is developed to describe combined cooling, heating, and power generating systems. This model is based on reversible power generation and refrigeration devices with practical, irreversible heat exchanger processes. It provides information on a system’s performance and allows easy comparisons among different systems at different loading conditions. Using both the first and second laws as well as the carbon dioxide production rate allows one to make a first-order system assessment of its energy usage and environment impact. The consistency of the exergy destruction rate and the first law performance ensures that the thermodynamic system boundaries are correctly and completely defined. The importance of the total thermal load to the required power ratio (HLRP) as a scaling parameter is demonstrated. A number of trends for limited conditions can be delineated even though the reported results confirmed that generalized trends are not identifiable because of the systems’ complexities. The results demonstrate that the combined vapor compression∕absorption refrigeration has higher first law utilization factors and lower carbon dioxide production rate for systems with high refrigeration to total thermal load ratios for all HLRP values. Fuel cell systems outperform engine systems for large refrigeration load applications. An illustration of combining these results to an economic analysis is presented.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleSelection of Distributed Power-Generating Systems Based on Electric, Heating, and Cooling Loads
dc.typeJournal Paper
dc.journal.volume128
dc.journal.issue3
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.2213275
dc.journal.fristpage168
dc.journal.lastpage178
dc.identifier.eissn1528-8994
dc.keywordsHeat
dc.keywordsEngines
dc.keywordsStress
dc.keywordsRefrigeration
dc.keywordsCombined heat and power
dc.keywordsCooling
dc.keywordsVapors
dc.keywordsExergy
dc.keywordsHeat exchangers
dc.keywordsFuel cells
dc.keywordsFlow (Dynamics)
dc.keywordsHeating
dc.keywordsFurnaces
dc.keywordsFuels AND Temperature
dc.treeJournal of Energy Resources Technology:;2006:;volume( 128 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record