Show simple item record

dc.contributor.authorMatthew A. Franchek
dc.contributor.authorJackie Mohrfeld
dc.contributor.authorAndy Osburn
dc.date.accessioned2017-05-09T00:19:19Z
dc.date.available2017-05-09T00:19:19Z
dc.date.copyrightSeptember, 2006
dc.date.issued2006
dc.identifier.issn0022-0434
dc.identifier.otherJDSMAA-26358#499_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/133408
dc.description.abstractPresented in this paper is a feedforward fueling controller identification methodology for the transient fueling control of spark ignition (SI) engines. The hypothesis of this work is that the feedforward fueling control of SI engines can be separated into steady state and transient phenomena and that the majority of the nonlinear behavior associated with engine fueling can be captured with nonlinear steady state models. The proposed transient controller identification process is built from standard nonparametric identification techniques followed by parametric model recovery. Crank angle serves as the independent variable for these models. Two separate system identification problems are solved to identify the air path dynamics and the fueling path dynamics. The transient feedforward controller is then calculated as the ratio of the air path-over-the fueling path dynamics thereby coordinating the engine fueling with the air path dynamics. It will be shown that a linear transient feedforward-fueling controller operating in tandem with a nonlinear steady state fueling controller can achieve air-fuel ratio regulation comparable to the production fueling controller without the extensive controller calibration process. The engine used in this investigation is a 1999 Ford 4.6L V-8 fuel injected engine.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleTransient Fueling Controller Identification for Spark Ignition Engines
dc.typeJournal Paper
dc.journal.volume128
dc.journal.issue3
dc.journal.titleJournal of Dynamic Systems, Measurement, and Control
dc.identifier.doi10.1115/1.2192831
dc.journal.fristpage499
dc.journal.lastpage509
dc.identifier.eissn1528-9028
dc.keywordsDynamics (Mechanics)
dc.keywordsControl equipment
dc.keywordsFuels
dc.keywordsEngines
dc.keywordsSteady state
dc.keywordsCalibration AND Signals
dc.treeJournal of Dynamic Systems, Measurement, and Control:;2006:;volume( 128 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record