Show simple item record

dc.contributor.authorSavalaxs Supa-Amornkul
dc.contributor.authorFrank R. Steward
dc.contributor.authorDerek H. Lister
dc.date.accessioned2017-05-09T00:17:38Z
dc.date.available2017-05-09T00:17:38Z
dc.date.copyrightMay, 2005
dc.date.issued2005
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28454#204_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/132533
dc.description.abstractIn order to have a better understanding of the interaction between the two-phase steam-water coolant in the outlet feeder pipes of the primary heat transport system of some CANDU reactors and the piping material, themalhydraulic modelling is being performed with a commercial computational fluid dynamics (CFD) code—FLUENT 6.1. The modeling has attempted to describe the results of flow visualization experiments performed in a transparent feeder pipe with air-water mixtures at temperatures below 55°C. The CFD code solves two sets of transport equations—one for each phase. Both phases are first treated separately as homogeneous. Coupling is achieved through pressure and interphase exchange coefficients. A symmetric drag model is employed to describe the interaction between the phases. The geometry and flow regime of interest are a 73 deg bend in a 5.9cm diameter pipe containing water with a Reynolds number of ∼1E5-1E6. The modeling predicted single-phase pressure drop and flow accurately. For two-phase flow with an air voidage of 5–50%, the pressure drop measurements were less well predicted. Furthermore, the observation that an air-water mixture tended to flow toward the outside of the bend while a single-phase liquid layer developed at the inside of the bend was not predicted. The CFD modeling requires further development for this type of geometry with two-phase flow of high voidage.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleModeling Two-Phase Flow in Pipe Bends
dc.typeJournal Paper
dc.journal.volume127
dc.journal.issue2
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.1904063
dc.journal.fristpage204
dc.journal.lastpage209
dc.identifier.eissn1528-8978
dc.keywordsPressure
dc.keywordsFlow (Dynamics)
dc.keywordsModeling
dc.keywordsPipes
dc.keywordsTwo-phase flow
dc.keywordsMixtures
dc.keywordsPipe bends
dc.keywordsGeometry
dc.keywordsReynolds number
dc.keywordsWater
dc.keywordsFlow visualization
dc.keywordsPressure drop
dc.keywordsEquations
dc.keywordsComputational fluid dynamics
dc.keywordsMeasurement
dc.keywordsDrag (Fluid dynamics) AND Temperature
dc.treeJournal of Pressure Vessel Technology:;2005:;volume( 127 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record