Show simple item record

dc.contributor.authorMarvin J. Cohn
dc.contributor.authorJeffrey F. Henry
dc.contributor.authorDan Nass
dc.date.accessioned2017-05-09T00:17:38Z
dc.date.available2017-05-09T00:17:38Z
dc.date.copyrightMay, 2005
dc.date.issued2005
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28454#197_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/132532
dc.description.abstractThe use of creep strength enhanced ferritic alloys, such as Grade 91, in fossil power plants has become popular for high temperature applications. Since Grade 91 has higher stress allowables than Grade 22, a designer can specify thinner component wall thicknesses, resulting in lower throughwall thermal stresses during transient events and lower material and pipe support costs. During the past two decades, Grade 91 has been used successfully in fossil power plants. However, this alloy has had some incidents of premature failures. Case histories discuss such factors as excessively hard material, extremely soft material, overheating failures, and improper mill processing. This compilation also discusses likely root causes and solutions to avoid these potential Grade 91 problems.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleFabrication, Construction, and Operation Problems for Grade 91 Fossil Power Components
dc.typeJournal Paper
dc.journal.volume127
dc.journal.issue2
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.1904054
dc.journal.fristpage197
dc.journal.lastpage203
dc.identifier.eissn1528-8978
dc.keywordsStress
dc.keywordsPipes
dc.keywordsCreep
dc.keywordsTemperature
dc.keywordsRupture
dc.keywordsFailure
dc.keywordsManufacturing
dc.keywordsFossil fuels AND Wall thickness
dc.treeJournal of Pressure Vessel Technology:;2005:;volume( 127 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record