Show simple item record

dc.contributor.authorDavid L. Rudland
dc.contributor.authorGery M. Wilkowski
dc.contributor.authorShinobu Kawaguchi
dc.contributor.authorNaoto Hagiwara
dc.date.accessioned2017-05-09T00:17:37Z
dc.date.available2017-05-09T00:17:37Z
dc.date.copyrightMay, 2005
dc.date.issued2005
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28454#143_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/132523
dc.description.abstractThis paper presents an analytical procedure to predict the conditional probability of dynamic ductile axial crack arrest within one pipe joint length for pipeline materials operating at temperature above the brittle-to-ductile transition temperature. The analysis assumes there is an event to initiate a rupture with probability of one, so that the probability of a fracture event occurring is the probability of the rupture event (i.e., from mechanical damage) times the conditional probability of arrest within one pipe joint. The underlying deterministic model centers on the Battelle Two-Curve approach with a correction to predict the arrest length given the actual material toughness relative to the minimum arrest toughness. Past full-scale experimental results were used to develop statistical parameters that were used with the deterministic model in a Monte Carlo analysis. This model was calibrated for linepipe materials with a toughness less than 150J and a grade less than X65. Example cases are presented to demonstrate the variation of the probability of arrest with the pipeline operating conditions.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleDetermination of Conditional Probability of Dynamic Ductile Axial Crack Arrest for Conventionally-Rolled, Lower-Toughness Linepipe Materials
dc.typeJournal Paper
dc.journal.volume127
dc.journal.issue2
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.1858924
dc.journal.fristpage143
dc.journal.lastpage150
dc.identifier.eissn1528-8978
dc.keywordsFracture (Materials)
dc.keywordsProbability
dc.keywordsToughness
dc.keywordsPipe joints AND Fracture (Process)
dc.treeJournal of Pressure Vessel Technology:;2005:;volume( 127 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record